IO Connection

Advanced Navigation offers two pre-terminated IO breakout cables (one for the 8 pin connector and one for the 16 pin connector) for quick connection to Certus. All external signal and power connections are 2m long. The evaluation IO breakout cables are supplied as part of the Certus Evaluation Kit. See Rugged Evaluation Kit.

Custom cable lengths are not available for pre-terminated cables.

Note: Both the connectors have a power supply connection. Only one of these power supplies should be connected. Connecting two different power supplies could result in damage to the unit.

8 Pin IO Breakout Cable

Certus 8 pin IO Breakout Cable

Pin	Function	RJ45	1PPS	Power
1	Power Ground	-	-	Ring
2	Power Supply	-	-	Tip
3	1PPS	-	2	-
4	Ethernet T+	1	-	-
5	Ethernet T-	2	-	-
6	Ethernet R+	3	-	-
7	Ethernet R-	6	-	-
8	1PPS (GPIO) Ground	-	5	-
Housing	Chassis Ground	-	-	-

Certus 8 Pin IO Breakout Cable Connector Pin-out

16 Pin IO Breakout Cable

Certus 16 pin IO Breakout Cable

Pin	Function	Primary	Auxiliary	CAN	GPIO	Power
1	Power Ground	-	-	-	-	Ring
2	Power Supply	-	-	-	-	Tip
3	Primary RS422 Tx+ / RS232 Tx	2	-	-	-	-
4	Primary RS422 Tx-	8	-	-	-	-
5	Primary RS422 Rx+ / RS232 Rx	3	-	-	-	-
6	Primary RS422 Rx-	7	-	-	-	-
7	CAN L	-	-	2	-	-
8	CAN H	-	-	7	-	-
9	GPIO 1	-	-	-	2	-
10	GPIO Ground	-	-	-	5	-
11	GPIO 2	-	-	-	3	-
12	Auxiliary RS422 Tx+ / RS232 Tx	-	2	-	-	-
13	Auxiliary RS422 Tx-	-	8	-	-	-
14	Auxiliary RS422 Rx+ / RS232 Rx	-	3	-	-	-
15	Auxiliary RS422 Rx-	-	7	-	-	-
16	Serial Ground	5	5	6	-	-
Housing	Chassis Ground	-	-	-	-	-

Certus 16 Pin IO Breakout Cable Connector Pin-out