Getting Started

1. Plug the 8 pin interface cable into the IO1 connector on the Certus.
2. Connect an Ethernet cable from the Ethernet socket on the breakout cable to your network or router.
3. Plug the power supply into the power connector on the breakout cable and then into the wall socket.
4. Download and install the Bonjour ZeroConf networking utility from the link https://www.advancednavigation.com/Bonjour64.msi.
5. In a web browser, type in the address http://certus.local

There are additional factors that you must review before you proceed with the installation. For more information, see Installing Certus