Evaluation Kit
The Evaluation Kits provides the necessary parts and accessories to set up and connect a GNSS Compass unit. They are available in both an Ethernet (POE) and Serial version.
Evaluation Kit Contents
The GNSS Compass Evaluation Kit Contents are detailed below for both the Ethernet and Serial variants.
| Part Number | Quantity | Description | Notes | Image | |
|---|---|---|---|---|---|
| Ethernet | Serial | ||||
| GC2-EK-POE | 1 | GNSS Compass Ethernet Variant |
GNSS Compass Ethernet variant Power over Ethernet interface Supports GPS, GLONASS, Galileo & BeiDou constellation L1/L2 10mm RTK Does not support L band |
|
|
| GC2-EK-SER | 1 | GNSS Compass Serial Variant |
GNSS Compass Serial variant RS422/RS232 and CAN interfaces Supports GPS, GLONASS, Galileo & BeiDou constellation L1/L2 10mm RTK Does not support L band |
|
|
| CABLE-FTDI | 1 | RS232/422 Adaptor to USB | FTDI USB to RS232 / RS422 (selectable) 1 metre cable |
|
|
| SUPPLY-24V | 1 | 1 | 24 V DC power supply |
100-240 V AC Mains to 24 V DC Power Supply (DC jack)
Includes 2-pin plug types A/C/G/I |
|
| GC-POE-CABLE-20M | 1 | 20m Ethernet cable for GNSS Compass |
20m CAT5e Ethernet cable with RJ45 Compatible with Ethernet units only (GC2-POE) IP67 environmentally sealed connector See Ethernet Connection for full details |
|
|
| GC-SER-BREAK-20M | 1 | 20m serial breakout cable for GNSS Compass |
20m cable to DB9 connectors Compatible with serial units only (GC2-SER) IP67 environmentally sealed connector See Serial Connection for full details |
|
|
| POE-INJECTOR-DC | 1 | DC POE Injector |
24V DC PoE Injector 25W 802.3at Type 2 "PoE+" |
|
|
Evaluation Kit Contents