Chassis Ground Point

Boreas A90 and A70 features a single M4 x 6 mm threaded insert on the front face of the enclosure to be used to earth the unit.

Boreas should be connected to ground for safety, and to provide an outlet for excess current in the case of a fault in the system.

To safely earth Boreas, connect one side of a ground strap to the ground strap point on the enclosure, and the other end to the ground of the power supply, or directly to earth if the application is on a stationary object. Ensure that the ground strap used is of a gauge that will allow the current to be safely carried.

Chassis Ground Point Location and Thread Specification