Part Numbers and Ordering
Standalone Units
The Boreas is supplied in an Evaluation Kit that contains everything required to get started operating the system right away. The Evaluation Kit is supplied in a rugged transport case to protect the equipment during transit.
| Part - Standalone Unit | Part - Evaluation Kit | Description |
|---|---|---|
| BOREAS-D90-X20P-BLK | BOREAS-D90-X20P-BLK-EK | Boreas D90 GNSS/INS with Ublox X20P GNSS receivers |
| BOREAS-D90-MX5-BLK | BOREAS-D90-MX5-BLK-EK | Boreas D90 GNSS/INS with Septentrio mosaic-X5 receivers |
| BOREAS-D70-X20P-BLK | BOREAS-D70-X20P-BLK-EK | Boreas D70 GNSS/INS with Ublox X20P GNSS receivers |
| BOREAS-D70-MX5-BLK | BOREAS-D70-MX5-BLK-EK | Boreas D70 GNSS/INS with Septentrio mosaic-X5 GNSS receivers |
Standalone Unit Part Numbers
Evaluation Kit and Accessories
Boreas Evaluation Kit Transport Case
Each evaluation kit includes a Boreas unit, along with the accessories needed to set up and connect the unit. Accessories may be purchased separately.
Included accessories are listed in the table below.
| Part Number | Description | BOREAS-D90-X20P-BLK-EK | BOREAS-D90-MX5-BLK-EK | BOREAS-D70-X20P-BLK-EK | BOREAS-D70-MX5-BLK-EK |
|---|---|---|---|---|---|
| Calian TW3990XF-G | Calian TW3990XF Full Band GNSS + L-Band (separate ground plane) dark gray, TNC connector | 2 | 2 | ||
| Calian AJ977XF | Calian SSL990XF Anti-Jam Multi-Constellation Triple-Band Antenna with TNC connector | 2 | 2 | ||
| CALIAN-POLE-MOUNT | Pole mount bracket for Calian Antennas Black. Powder coated steel | 2 | 2 | 2 | 2 |
| BF046WS210224-01 | RG-58A/U GNSS antenna cable, 4 meter, with TNC to TNC connectors |
2 | 2 | 2 | 2 |
| CABLE-38999-19-32-BREAKOUT | 2m breakout cable MIL-DTL-38999 Series III Size 19, 32-pin connector Provides connectors for Primary, Auxiliary, CAN, GPIO, 1PPS, Alert and Power. See IO Breakout Cable. |
1 | 1 | 1 | 1 |
| CABLE-FTDI | FTDI USB to RS232/RS422 (switchable) 1m cable |
1 | 1 | 1 | 1 |
| CABLE-38999-RJ45-3M | Cable for Boreas Ethernet connector, 38999 to RJ45, 3m |
1 | 1 | 1 | 1 |
| SUPPLY-24V | 100-240 V AC Mains to 24 V DC Power Supply (DC jack)
Includes 2-pin plug types A/C/G/I |
1 | 1 | 1 | 1 |
| 38999-19-CAP | Waterproof cap for Size 19 MIL-DTL-38999 Series III socket connector Used to maintain IP67 rating when not using an Ethernet connection |
1 | 1 | 1 | 1 |
| BOREAS90-KIT-CASE | Evaluation Kit transport case |
1 | 1 | 1 | 1 |
Part numbers for accessories in the Evaluation Kit
GNSS Receiver License Upgrades
These licenses are only applicable to units with a Trimble BD992 GNSS Receiver, variants: CERTUS-BD992 and CERTUS-EVO-OEM-BD992.
| Part Number | Description |
|---|---|
| BD992-LIC-10CM | Upgrade Trimble BD992 GNSS Receiver from 30 cm to 10 cm RTK accuracy. |
| BD992-LIC-8MM | Upgrade Trimble BD992 GNSS Receiver from 30 cm to 8 mm RTK accuracy. Add Galileo and BeiDou constellations. |
Part Numbers for GNSS Receiver Licence Upgrades
Accessories
The following additional accessories are associated with the Boreas.
| Part Number | Description | Boreas 50 | Boreas 70/90 |
|---|---|---|---|
| CABLE-38999-RJ45-10M | 10 m industrial Ethernet cable with MIL-DTL-38999 Series III RJ45 to RJ45 connectors. |
Yes |
|
| CABLE-38999-19-32-UNT-5M | 5 m unterminated 26 core cable with a MIL-DTL-38999 Series III 32-pin connector for IO connection. | Yes | |
| CABLE-BOREAS50-UNT-3M | Unterminated cable for use with Boreas 50, 3 metres. | Yes | |
| VSP6337L | VeroStar GNSS Antenna - L1/L2/L5 plus L band, pole mount (1"-14 thread with adapter included for 5/8"-11 thread), TNC Female Connector. | Yes | |
| G5ANT-53A4T1 | Antcom G5 L1/L2 GNSS antenna with an optional 5/8"-11 thread survey mount. | Yes | |
| OBDII-ODOMETER | OBDII Odometer Data Unit for providing accurate odometer data to vehicle-mounted units. | Yes | Yes |
| MOUNT-SUCT | Suction cup 5/8" GNSS antenna survey mount for easy installation of the GNSS antenna on vehicles. | Yes | Yes |
Part Numbers for Accessories