Mounting Alignment

The easiest way to align Certus Mini is by installing the unit with its sensor axes aligned with the vehicle axes. There are notches marked on the X and Y axis to assist with alignment. Install the unit such that the X+ axis points forward towards the front of the vehicle and the Z+ axis points straight down towards the ground as shown below.

If aligning Certus Mini with the vehicle axes is not possible within vehicle size or shape constraints, it may be mounted in a different alignment and the alignment offset can be configured Using Certus Mini Manager. For easy roll and pitch alignment, use the Set Zero Orientation button in the Alignment page to set the current orientation as the level alignment.

Note: This will only correct for roll and pitch offsets. Any heading offset will need to be entered manually and saved after using this function.

Mounting Axes