Quick Start - Bench Test

This quickstart describes first steps to connect to the unit, on the bench, and verify the unit works.

Pre-requisites

Before starting:

• You should have components provided in the unit's Evaluation Kit.

Steps

1. Plug the IO breakout cable into the IO connector on the unit. See IO Connection.
2. Plug the power supply into the power connector on the breakout cable and then into the wall socket. See Power Supply.
3. Connect either an Ethernet cable from the Ethernet socket on the unit to your network or switch. See Ethernet Connection.
4. If using Windows, download and install the Bonjour ZeroConf networking utility from the link https://www.advancednavigation.com/Bonjour64.msi.
5. In a web browser, type the address: http://boreas.local.
6. Verify that you can see the web status page for the unit, as described in the Main View.

Next steps

You can now move onto installing your unit onto your platform. Refer to Installing.